{"product_id":"innokin-prism-s-replacement-coils-5-pack","title":"Innokin Prism S Replacement Coils (5 Pack)","description":"\u003cp dir=\"ltr\"\u003eIf you've been vaping on an Innokin Endura T20-S, EZ Watt or Apex for a while, you'll already know the coil is the part that needs the most regular attention. The Innokin Prism S is the coil that goes with all three, and having a pack of five spares in the drawer means you're never caught out when the flavour starts to fade.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThere are three versions to choose from. The 1.5 ohm gives the tightest, most cigarette-like pull and is the gentlest of the three on power. The 0.8 ohm opens the draw slightly for a bit more vapour and a fuller flavour. The 0.9 ohm uses a mesh coil rather than wound wire, heating faster and more evenly, so if you're chasing the strongest flavour from your e-liquid, that's usually the one worth trying first.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eKey Features\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGenuine Innokin Prism S coils, 5 per pack\u003c\/li\u003e\n\u003cli\u003eChoice of 0.8Ω (16-18W), 0.9Ω Mesh (14.5-18W) or 1.5Ω (13-14W)\u003c\/li\u003e\n\u003cli\u003eKanthal A1 wound coil with organic cotton on the 0.8Ω and 1.5Ω\u003c\/li\u003e\n\u003cli\u003eMesh heating element on the 0.9Ω for quicker warm-up and stronger flavour\u003c\/li\u003e\n\u003cli\u003eStandard 510 connector pin\u003c\/li\u003e\n\u003cli\u003eBuilt for the no-spill coil swap tank system\u003c\/li\u003e\n\u003cli\u003eDesigned for mouth-to-lung (MTL) vaping with 50\/50 or high PG e-liquid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eFull Specifications\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eBrand: Innokin. Coil range: Prism S. Pack size: 5 coils. Coil construction: Kanthal A1 wire (0.8Ω, 1.5Ω) or mesh (0.9Ω). Wicking: organic cotton. Connection: 510 pin. Vaping style: MTL only. Best paired with: 50\/50 or high PG e-liquid. Manufactured in China.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003ePower ratings: 0.8Ω runs at 16-18W, 0.9Ω Mesh runs at 14.5-18W, 1.5Ω runs at 13-14W.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDimensions and Weight\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eEach coil measures around 3.3cm in height (1.3 inches), with a 1.3cm diameter (0.5 inches). A full pack of 5 coils weighs approximately 11g, which is 0.011kg or roughly 0.024lbs. These measurements stay consistent across all three resistances.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e5 x Innokin Prism S Coils in your selected resistance\u003c\/li\u003e\n\u003cli\u003eNo tank, drip tip or device is included in this listing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eCoil and Compatibility Guide\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Prism S coil is built to fit the tank system used on the Innokin Endura T20-S, the EZ Watt, and the Innokin Apex kit and tank. If you're using an Apex, keep in mind the 1.5 ohm coil isn't compatible with that tank, so choose between the 0.8 ohm and the 0.9 ohm mesh instead.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTo change a coil, unscrew the base of your tank while there's still a little e-liquid inside to stop it dripping, pull the old coil out, and push the new one in with the 510 pin facing down. Screw the base back into place, refill the tank, and let it sit for around 5 to 10 minutes before your first puff so the cotton has time to soak through properly. This step matters more than most people expect, a dry coil will taste burnt on the very first draw.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eRecommended E-Liquids\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThis coil performs best with high PG or 50\/50 e-liquid rather than thicker high VG shortfills, which is exactly what our \u003ca href=\"https:\/\/vsavi.co.uk\/collections\/vsavi-platinum-e-liquids\" title=\"Vsavi Platinum Range of E-Liquids\"\u003e\u003cstrong\u003eVsavi Platinum E-Liquid range\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/vsavi.co.uk\/collections\/vsavi-platinum-e-liquids\"\u003e\u003c\/a\u003e is formulated for. If you're switching from smoking, tobacco and menthol flavours like Red Tobacco or Menthol tend to be the most familiar starting point and suit this coil's power range well. If you're after other Innokin coil options for a different device, our \u003ca href=\"https:\/\/vsavi.co.uk\/collections\/coils\" title=\"Vsavi Coil Range\"\u003e\u003cstrong\u003eCoils\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/vsavi.co.uk\/products\/innokin-z-coils\"\u003e\u003c\/a\u003e page shows the wider range we stock.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eUsage and Maintenance Advice\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003ePrime every new coil before vaping it. A few drops of e-liquid directly onto the exposed cotton, then a full tank left to stand for several minutes, gives the wick time to saturate. Never take a puff on a dry coil, even to test it, as this will scorch the wick almost instantly. Most vapers find a Prism S coil lasts somewhere between 3 and 10 days depending on how often they vape and how sweet their chosen e-liquid is, sweeter flavours tend to clog the wicking faster.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhich Prism S resistance is right for me, 0.8, 0.9 or 1.5 ohm?\u003c\/strong\u003e\u003cbr\u003eIf you're after the tightest, most cigarette-like draw, choose 1.5 ohm. For a bit more vapour and flavour, go for 0.8 ohm. If flavour is your main priority, the 0.9 ohm mesh tends to give the strongest result of the three.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eAre these the same coils as the older Innokin T18 range?\u003c\/strong\u003e\u003cbr\u003eNo, the Prism S is a different coil platform designed specifically for the Endura T20-S, EZ Watt and Apex tank base, and won't fit the older T18 or T18E tanks.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan I use the 1.5 ohm coil in an Innokin Apex?\u003c\/strong\u003e\u003cbr\u003eNo, the Apex tank only accepts the 0.8 ohm and 0.9 ohm mesh versions. The 1.5 ohm is built for the T20-S and EZ Watt.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow long should a Prism S coil last?\u003c\/strong\u003e\u003cbr\u003eGenerally between 3 and 10 days, though this depends heavily on how often you vape and the sugar content of your e-liquid. Sweeter juices tend to shorten coil life.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy does my brand new coil already taste burnt?\u003c\/strong\u003e\u003cbr\u003eThis usually means it wasn't primed correctly. Make sure the tank is fully filled and left to stand for several minutes before you take your first puff.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan I use nic salts in this coil?\u003c\/strong\u003e\u003cbr\u003eNic salts are generally designed for lower-power pod kits, while the Prism S runs between 13W and 18W. A 50\/50 or high PG e-liquid at a comparable strength usually performs better here.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWill shortfill or high VG e-liquid work with this coil?\u003c\/strong\u003e\u003cbr\u003eIt's not recommended. The Prism S and the tanks it fits are built around thinner, high PG e-liquid, and high VG juice is likely to cause dry hits and a shortened coil lifespan.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow do I tell when it's time to change the coil?\u003c\/strong\u003e\u003cbr\u003eSigns to look out for include a burnt or muted taste, a gurgling sound, weaker vapour, or visible darkening around the airflow slots.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs the Innokin Prism S coil TPD compliant?\u003c\/strong\u003e\u003cbr\u003eYes, all three resistances are registered with the MHRA under UK TPD regulations. Compliance information is correct at the time of writing, and we'd recommend checking the MHRA public register for the latest status.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIf my coil burns out, do I need a new tank too?\u003c\/strong\u003e\u003cbr\u003eNot usually. A burnt coil rarely affects the tank itself, so replacing just the coil is normally enough, provided the glass and seals are still in good condition.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs this a good starter product if I'm new to switching from smoking?\u003c\/strong\u003e\u003cbr\u003eThe devices this coil fits (the T20-S in particular) are aimed squarely at smokers switching over, thanks to their tight, cigarette-style draw. If you're just starting out, the 1.5 ohm coil paired with a tobacco or menthol e-liquid is the closest match to a familiar smoking sensation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan this coil be used in tanks from other brands?\u003c\/strong\u003e\u003cbr\u003eNo, it's a proprietary fit for Innokin's Prism S tank system only and won't screw into tanks from other manufacturers.\u003c\/p\u003e","brand":"VSAVI","offers":[{"title":"0.8ohm","offer_id":57906421629310,"sku":null,"price":6.49,"currency_code":"GBP","in_stock":true},{"title":"0.9ohm","offer_id":57906421662078,"sku":null,"price":6.49,"currency_code":"GBP","in_stock":false},{"title":"1.5ohm","offer_id":57906421694846,"sku":null,"price":6.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/3031\/1266\/files\/innokin-prism-s-coils-0.8-box.jpg?v=1787577331","url":"https:\/\/vsavi.co.uk\/products\/innokin-prism-s-replacement-coils-5-pack","provider":"VSAVI | E-Liquids | Vape Kits","version":"1.0","type":"link"}