OXVA VPrime 2 (Dual Mesh) Replacement Pods
It's easy to blame a vape kit itself when a vape stops tasting right, but nine times out of ten the real culprit is a tired coil. The pod is doing more than holding your e-liquid, it's the coil, the airflow and the seal all in one part, so once it's past its best, the whole experience drops off with it. A fresh pod is usually all it takes to bring the VPrime 2 straight back to how it performed on day one.
These are genuine OXVA VPrime 2 Dual Mesh Replacement Pods, sold as a 2-pack at £6.49 (inc. VAT), in 0.4Ω or 0.6Ω.
Built to match the kit exactly, not a compromise version
Some replacement pods on the market are a step down from what ships in the original box. These aren't, they use the same UniTech 3.0 dual mesh coil fitted to the VPrime 2 kit as standard, so there's no dip in flavour or vapour production between your original pods and a fresh pack. Buy the resistance you know works for you and carry on exactly as before.
Key Features
UniTech 3.0 dual mesh coils. Dual mesh construction heats e-liquid more evenly than a single mesh coil, which means a fuller flavour hit from the first puff. OXVA states this design delivers up to double the flavour and lifespan of a standard single mesh coil.
Purpose-built fit. No adapters, no workarounds, these pods click straight into the VPrime 2's pod bay using the same connection and seal as the originals.
0.4Ω or 0.6Ω, sold separately. Restock whichever resistance suits you, the tighter 0.6Ω for nic salts, the more open 0.4Ω for freebase or shortfill e-liquid.
2ml capacity, UK TPD-compliant. The maximum legal capacity for nicotine e-liquid in the UK, so there's nothing to work around.
Boost mode compatible. Switching to Boost fires both mesh elements in the coil together, effectively lowering the pod's working resistance (0.4Ω behaves closer to 0.2Ω, 0.6Ω closer to 0.3Ω) for a stronger hit and denser vapour on demand.
Improved leak resistance. The same upgraded seal as the pods supplied with the kit, built to cut down on the leaking older pod designs were known for.
Straightforward refill. Side or top fill port with a silicone bung, quick to top up and reseals cleanly between fills.
Full Specifications
• Pack size: 2 pods per pack
• Compatible device: OXVA VPrime 2 Pod Kit only
• Resistance options: 0.4Ω or 0.6Ω (sold as separate variants)
• Coil type: UniTech 3.0 dual mesh
• Pod capacity: 2ml per pod (UK TPD-compliant)
• 0.4Ω recommended wattage: 28W to 38W (50/50 or 70/30 e-liquid recommended)
• 0.6Ω recommended wattage: 20W to 25W (50/50 e-liquid recommended)
• Fill style: Side or top fill port with silicone bung
• Boost mode: Supported, fires both mesh coil elements together
Dimensions and Weight
OXVA hasn't published separate dimensions or a weight for the pod cartridge on its own, which is normal for accessory pods, they're sized purely to slot into the VPrime 2's pod bay, so there's no separate footprint to plan around. For reference, the VPrime 2 device itself measures 11.3 cm (4.45 in) tall, 4.1 cm (1.62 in) wide and 2.8 cm (1.09 in) deep, and weighs 150 g (0.33 lb), and the fitted pod sits flush within that.
What's in the Pack
• 2x OXVA VPrime 2 Dual Mesh Pods, matched resistance (0.4Ω or 0.6Ω, whichever you order)
These arrive empty, so have your chosen e-liquid ready, see our pairing guide below.
Compatibility Guide
Built specifically for the OXVA VPrime 2 Pod Kit, these pods aren't interchangeable with any other device in OXVA's range or elsewhere.
Compatible device: OXVA VPrime 2 Pod Kit only.
Compatible e-liquids: Both nic salts and standard freebase e-liquids work well, which suits best depends on the resistance you're running, covered in full below.
Recommended E-Liquids
For the 0.6Ω pod (tighter, mouth-to-lung draw): nic salts are the natural pairing, giving a smooth throat hit at higher strengths without the harshness freebase nicotine can bring at the same strength.
• Hangsen Bar Fuel Nic Salt E-liquid
• Lost Mary Maryliq Nic Salt E-Liquids
• OXVA Ox Passion Nic Salt E-Liquids, developed by OXVA to suit their own pod coils
• Full range: Nic Salts at VSAVI
For the 0.4Ω pod (looser, more direct-lung draw): a 50/50 or higher-VG shortfill will give thicker vapour and fuller flavour at a lower nicotine strength.
• Nasty Juice Shortfill E-Liquid 50ml
• IVG Dessert Range Shortfill E-Liquid 50ml
• Double Drip Shortfill E-Liquid
• Full range: Shortfill E-Liquids at VSAVI
Coil and Pod Guide
Choosing a resistance. The resistance is printed on the pod itself, check the one currently fitted if you're unsure. 0.6Ω suits a tighter, cigarette-like draw with nic salts, 0.4Ω suits a more open draw with bigger vapour on freebase or shortfill.
Coil Lifespan. OXVA rates the UniTech 3.0 dual mesh coil at up to double the lifespan of a standard single mesh coil, though it doesn't publish an exact puff count. As a general guide rather than an OXVA figure, expect somewhere between 200 and 300 puffs of total coil life per pod, that's across several refills of the 2ml tank rather than from a single fill, before flavour starts to noticeably drop off, though this varies with wattage, e-liquid VG/PG ratio and how often you're vaping. A burnt or muted taste, a gurgling sound, or visibly darkened e-liquid in the pod are the usual signs it's time to swap.
Fitting a new pod. Remove the old pod, fill the new one through its side or top fill port, let it settle for five to ten minutes so the wicking fully saturates, then click it into place. Skipping the wait is the most common cause of a dry, burnt first hit.
Keep wattage matched to the pod. Running a 0.6Ω pod up near 38W will shorten its lifespan and can turn clean flavour into a burnt taste far sooner than it should.
Usage Advice
Always prime a new pod before your first draw, five to ten minutes filled and resting is enough for the wicking material to saturate properly.
Top up gradually rather than filling right to the top in one go, leaving a little headroom helps e-liquid move properly inside the pod as you vape.
If you're switching e-liquid flavours or brands, fit a fresh pod first, residual flavour in a used coil can affect the taste of a new juice for the first few fills.
Store spare pods in their packaging, somewhere cool and away from direct sunlight, until you're ready to fill and fit them.
Frequently Asked Questions
Which resistance should I buy for my VPrime 2?
Check the pod currently fitted, the resistance is printed on it. If choosing fresh, 0.6Ω suits nic salts and a tighter draw, 0.4Ω suits freebase or shortfill and a more open, bigger-vapour draw.
Do these pods come filled with e-liquid?
No, they arrive empty, fill them with your own e-liquid before fitting.
How many pods are in a pack?
Two, both the same resistance, either 0.4Ω or 0.6Ω depending on the variant you order.
How long does one pod last?
Roughly 200 to 300 puffs as a general guide, depending on your wattage, e-liquid and how often you vape.
How do I know when to change the pod?
A flat or burnt taste, a crackling sound on the draw, or darkened e-liquid visible in the pod are the usual signs.
Do these pods fit any other OXVA device?
No, they're built specifically for the VPrime 2 Pod Kit and won't fit the original VPrime, the Xlim range, or any other pod system.
What's the maximum nicotine strength I can use?
20mg (2%) is the legal ceiling for e-liquid sold in the UK, and also a sensible maximum for a comfortable vape on either pod.
Does Boost mode work with these pods?
Yes, Boost mode fires both mesh elements in the coil together, giving a stronger hit and denser vapour than the standard setting.
Can I use thicker, high-VG e-liquid in these pods?
Yes, especially in the 0.4Ω pod, which is built for that style of juice across its 28W to 38W range. The 0.6Ω pod prefers thinner, higher-PG or 50/50 liquids.
Do these pods leak?
They use the same improved seal as the pods supplied with the kit, designed to reduce leaking, though keeping the device upright and avoiding overfilling will help minimise the risk with any pod system.
Can I order a mixed pack with both resistances?
No, each pack is a single resistance, add both variants to your basket separately if you want spares of each.
Will original VPrime pods fit the VPrime 2, or vice versa?
No, the VPrime 2 uses a new Dual Mesh pod design that isn't interchangeable with the original VPrime's pods.
Do I need any tools to fit a new pod?
No, the pods click into the VPrime 2's pod bay by hand, no tools required.
Sources
- OXVA VPrime 2 official product page, for the UniTech 3.0 dual mesh coil flavour and lifespan claims referenced above.